Victron MultiPlus-II GX 48/3000/35-32 230V - PMP482306000
- Description
- Click Here to view Data sheet (PDF)Warranty:
- Find my kit
- Why Buy from Buzz?
- Shipping
- Disclaimer
The Victron MultiPlus-II GX 48/3000/35-32 230V
Inverter Charger integrates a MultiPlus-II and a GX device with a 2 x 16 character display and Wi-Fi.
An Inverter/Charger with device networking built-in, the MultiPlus-II GX communicates with a solar charger, batteries and other devices to control a grid-connected, off-grid or remote power installation.
Capable of parallel operation for increased power output or battery charge-rates, the MultiPlus-II GX can also be configured for three-phase supply.
The display reads battery, inverter and solar charge controller parameters; the same parameters can be accessed with a smartphone or other Wi-Fi enabled device.
A host of advanced features - such as uninterrupted power supply, setting load limits, and supplementing limited grid-power availability with battery power - can all be controlled straight from your phone or smart device.
Remote monitoring is also possible.
The integrated GX device includes:
BMS-Can interface.
This can be used to connect to a compatible CAN-bus managed battery.
Note that this not a VE.Can compatible port.
USB port, Ethernet port and VE.Direct port.
Applications
The MultiPlus-II GX is intended for applications where additional interfacing with other products and/or remote monitoring is required, such as on-grid or off-grid energy storage systems and certain mobile applications.
Parallel and three phase operation
Only one GX unit is needed in case of Parallel and three phase operation.}
Seamless Backup Power
When the grid fails or shore/generator power disconnects, the MultiPlus ensures that your electronic devices remain uninterrupted thanks to its main output with no-break functionality. It switches in less than 20 milliseconds, so even sensitive equipment like computers remain unaffected. There's a second output, which is ideal for appliances that shouldn't drain the battery, such as water heaters.
PowerControl and PowerAssist
A key feature, PowerControl, ensures optimal usage of available power, regulating the draw from sources like generators to prevent overloads.
Meanwhile, PowerAssist steps in to boost the capacity during peak requirements by utilising battery power, ensuring smooth operations even when shore or generator power isn't sufficient.
Besides its operational excellence, the MultiPlus is adaptable.
The system can be configured using a simple DIP switch for standalone applications, while more complex setups can utilise the VE.Bus software. Monitoring and control can be achieved on-site through various devices, such as the Battery Monitor or Multi Control Panel, while remote monitoring and control are facilitated through GX devices. All data can be stored and accessed via the Victron Remote Management website, providing comprehensive oversight no matter where you are.
Interested in starting your solar journey, but need some help in deciding what is the best system for your needs, free and without obligation?
Start by CLICKING HERE
We'll be glad to assist you, in achieving Energy Independence... Your Way.
Yep, we know... there are lots of options when buying products online.
We also believe in providing you with only the highest quality products, combined with exceptional customer service.
How You Win:
- Free shipping Australia wide on most orders
- Most competitive prices available
- Pre and after sales Technical Support
- 30 Day Easy Returns Policy
We offer Free Shipping on most products, however some custom orders and heavy/bulky items may require specialised freight to some destinations, as noted on the affected products.
We want to be upfront. Nobody like nasty surprises and we strive to give you the best value. In these instances, we will contact you before processing the order to determine the fastest and most cost effective way of getting your items delivered.
Important Disclaimer: Installation of Hardwired Electrical Products in Australia
Please read the following information, including the disclaimer at the bottom of this page;
by purchasing from Buzz Energy Systems, you understand and acknowledge these terms.
When it comes to the installation of hardwired electrical products in Australia, it is important to be aware of the regulations and guidelines in place to ensure safety and compliance.
As per the Electrical Safety Act, installations operating at ELV (Extra Low Voltage) levels of 60 volts and below can be installed by individuals with the necessary knowledge and skills.
However, it is crucial to note that installations operating above ELV levels require the expertise of licensed electricians and experienced installers. Products falling under this category are not suitable for DIY (Do-It-Yourself) installation and must be handled by professionals. Attempting to install such products without the proper qualifications can not only compromise performance but also invalidate any manufacturer's warranties.
At Buzz Energy Systems, we recognise the importance of reliable and efficient installations that prioritise safety, performance and warranty compliance. Our team consists of qualified tradespeople and specialists who are equipped with the expertise required to handle complex electrical installations.
For installations that operate above ELV levels, we strongly advise against DIY installation. Instead, we recommend seeking professional assistance from licensed electricians and experienced installers to ensure the proper installation and optimal performance of such products.
When it comes to installing hardwired electrical products above ELV levels, rest assured that Buzz Energy Systems can provide the necessary qualified tradespeople and specialists. Our professional installation services guarantee compliance with regulations, the preservation of manufacturers warranties and most importantly, your safety.
Do not compromise on the installation of your hardwired electrical products. Trust Buzz Energy Systems for a professional and hassle-free experience.
Contact us today for advice or to schedule your installation with our qualified team.
Legal Indemnity Disclaimer
By engaging with Buzz Energy Systems, purchasing and utilising our products and services, you acknowledge and agree to the following indemnity disclaimer. This disclaimer covers any potential claims for death, injury, property damage, financial loss, or warranty claims:
Assumption of Responsibility: Buzz Energy Systems shall not be responsible or liable for any consequences arising from the installation, operation or use of our products or services, excluding any rights or remedies you may have under the Australian Consumer Law or other applicable legislation. You, as the user or purchaser, assume full responsibility for any potential risks, damages, or losses that may occur, including those not covered under Australian Consumer Law.
Proper Installation and Use: It is your responsibility to ensure that the installation, operation, and use of our products align with relevant laws, regulations, and safety guidelines. We strongly recommend seeking the expertise of licensed professionals to handle installations above ELV levels and to ensure compliance with all applicable codes and standards.
Personal Injury and Property Damage: Buzz Energy Systems shall not be held liable for any injuries, damages, or losses caused by improper installation, operation, or maintenance of our products. You agree to indemnify and hold Buzz Energy Systems harmless from any liability in relation to personal injury or property damage resulting from the use of our products or services.
Financial Loss: Buzz Energy Systems shall not be liable for any financial loss, including but not limited to direct or indirect loss of profits, revenue, or savings, arising from the use or inability to use our products or services. Any costs associated with repairs, replacements, or damages incurred fall under your responsibility.
Warranty Claims: Buzz Energy Systems provides manufacturer warranties on our products, subject to the terms and conditions outlined in the accompanying documentation. However, we shall not be held liable for any warranty claims resulting from improper installation, operation or maintenance of our products. Warranties may become void if our products are not installed or used in accordance with supplied instructions or if unauthorised modifications or repairs are made.
Independent Advice: It is recommended that you seek independent advice, particularly legal or professional guidance, to assess the suitability of our products and services for your specific requirements.
By engaging with Buzz Energy Systems, you acknowledge and voluntarily assume all risks associated with the installation, operation, and use of our products and services. This disclaimer extends to any third parties who may be affected by the use of our products or services.
Please note: This indemnity disclaimer is intended to be a general statement of our position and should not be interpreted as a comprehensive legal contract. We recommend seeking legal advice to draft and review any specific agreements or contracts related to the use of Buzz Energy Systems' products and services.