Skip to content
Australia, Welcome to Buzz Energy Systems - Delivering Nationwide - Call Us 1300 763 469.
Australia, Welcome to Buzz Energy Systems - Delivering Nationwide - Call Us 1300 763 469.
Victron Phoenix Inverter 12/2000 230V Smart - Front View

Victron Phoenix Inverter 12/2000 230V Smart - PIN122201000

$873.00

Notify me when back in stock

The Victron Phoenix Inverter 12/2000 230V Smart - PIN122201000 is an efficient and reliable inverter. Built on our proven and field-tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing.

This 12v battery inverter is powerful enough to supply the most common plug-in appliances in your car, boat, caravan or home. A toroidal transformer provides a high peak power surge capacity, outputting stable voltage and frequency with a high-quality sine wave.

Installation is simpler than ever before, and terminals are now more accessible for the installer, enabling a more professional finish.

Main Features:

Bluetooth built-in: fully configurable with a tablet or smartphone, For remote monitoring and system integration. 
• Low battery voltage alarm
• Low battery voltage cut-off and restart levels
• Dynamic cut-off: load-dependent cut-off level
• Output voltage: 210 – 245 V
• Frequency: 50 Hz or 60 Hz
• ECO mode on/off
VE. Direct communication port: The VE. Direct port can be connected to a computer (VE. Direct to USB interface cable needed) to configure and monitor the same parameters.
Proven reliability: The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short-circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power: Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode: When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once on standby, the inverter will switch on for a short period every few seconds (adjustable). If the load exceeds the preset level, the inverter will remain on.
Remote on/off: A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (left) of the two pole connectors can be switched to battery plus, or the L terminal (right) of the two pole connectors can be switched to battery minus (or the chassis of a vehicle, for example).

Also Available in:

Click Here To View Victron Phoenix Inverter 12/2000 230V Smart DATASHEET

Click Here To View Victron Phoenix Inverter 12/2000 230V Smart MANUAL

Yep, we know... there are lots of options when buying products online.

We also believe in providing you with only the highest quality products, combined with exceptional customer service.

How You Win:

  • Free shipping Australia wide on most orders
  • Most competitive prices available
  • Pre and after sales Technical Support
  • 30 Day Easy Returns Policy 

We offer Free Shipping on most products, however some custom orders and heavy/bulky items may require specialised freight to some destinations, as noted on the affected products.

We want to be upfront. Nobody like nasty surprises and we strive to give you the best value. In these instances, we will contact you before processing the order to determine the fastest and most cost effective way of getting your items delivered.

Important Disclaimer: Installation of Hardwired Electrical Products in Australia

Please read the following information, including the disclaimer at the bottom of this page;
by purchasing from Buzz Energy Systems, you understand and acknowledge these terms. 

When it comes to the installation of hardwired electrical products in Australia, it is important to be aware of the regulations and guidelines in place to ensure safety and compliance.
As per the Electrical Safety Act, installations operating at ELV (Extra Low Voltage) levels of 60 volts and below can be installed by individuals with the necessary knowledge and skills.

However, it is crucial to note that installations operating above ELV levels require the expertise of licensed electricians and experienced installers. Products falling under this category are not suitable for DIY (Do-It-Yourself) installation and must be handled by professionals. Attempting to install such products without the proper qualifications can not only compromise performance but also invalidate any manufacturer's warranties. 

At Buzz Energy Systems, we recognise the importance of reliable and efficient installations that prioritise safety, performance and warranty compliance. Our team consists of qualified tradespeople and specialists who are equipped with the expertise required to handle complex electrical installations.

For installations that operate above ELV levels, we strongly advise against DIY installation. Instead, we recommend seeking professional assistance from licensed electricians and experienced installers to ensure the proper installation and optimal performance of such products.

When it comes to installing hardwired electrical products above ELV levels, rest assured that Buzz Energy Systems can provide the necessary qualified tradespeople and specialists. Our professional installation services guarantee compliance with regulations, the preservation of manufacturers warranties and most importantly, your safety.

Do not compromise on the installation of your hardwired electrical products. Trust Buzz Energy Systems for a professional and hassle-free experience.
Contact us today for advice or to schedule your installation with our qualified team.

Legal Indemnity Disclaimer

By engaging with Buzz Energy Systems, purchasing and utilising our products and services, you acknowledge and agree to the following indemnity disclaimer. This disclaimer covers any potential claims for death, injury, property damage, financial loss, or warranty claims:

  1. Assumption of Responsibility: Buzz Energy Systems shall not be responsible or liable for any consequences arising from the installation, operation or use of our products or services, excluding any rights or remedies you may have under the Australian Consumer Law or other applicable legislation. You, as the user or purchaser, assume full responsibility for any potential risks, damages, or losses that may occur, including those not covered under Australian Consumer Law.

  2. Proper Installation and Use: It is your responsibility to ensure that the installation, operation, and use of our products align with relevant laws, regulations, and safety guidelines. We strongly recommend seeking the expertise of licensed professionals to handle installations above ELV levels and to ensure compliance with all applicable codes and standards.

  3. Personal Injury and Property Damage: Buzz Energy Systems shall not be held liable for any injuries, damages, or losses caused by improper installation, operation, or maintenance of our products. You agree to indemnify and hold Buzz Energy Systems harmless from any liability in relation to personal injury or property damage resulting from the use of our products or services.

  4. Financial Loss: Buzz Energy Systems shall not be liable for any financial loss, including but not limited to direct or indirect loss of profits, revenue, or savings, arising from the use or inability to use our products or services. Any costs associated with repairs, replacements, or damages incurred fall under your responsibility.

  5. Warranty Claims: Buzz Energy Systems provides manufacturer warranties on our products, subject to the terms and conditions outlined in the accompanying documentation. However, we shall not be held liable for any warranty claims resulting from improper installation, operation or maintenance of our products. Warranties may become void if our products are not installed or used in accordance with supplied instructions or if unauthorised modifications or repairs are made.

  6. Independent Advice: It is recommended that you seek independent advice, particularly legal or professional guidance, to assess the suitability of our products and services for your specific requirements.

By engaging with Buzz Energy Systems, you acknowledge and voluntarily assume all risks associated with the installation, operation, and use of our products and services. This disclaimer extends to any third parties who may be affected by the use of our products or services.

Please note: This indemnity disclaimer is intended to be a general statement of our position and should not be interpreted as a comprehensive legal contract. We recommend seeking legal advice to draft and review any specific agreements or contracts related to the use of Buzz Energy Systems' products and services.

The Victron Phoenix Inverter 12/2000 230V Smart - PIN122201000 is an efficient and reliable inverter. Built on our proven and field-tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing.

This 12v battery inverter is powerful enough to supply the most common plug-in appliances in your car, boat, caravan or home. A toroidal transformer provides a high peak power surge capacity, outputting stable voltage and frequency with a high-quality sine wave.

Installation is simpler than ever before, and terminals are now more accessible for the installer, enabling a more professional finish.

Main Features:

Bluetooth built-in: fully configurable with a tablet or smartphone, For remote monitoring and system integration. 
• Low battery voltage alarm
• Low battery voltage cut-off and restart levels
• Dynamic cut-off: load-dependent cut-off level
• Output voltage: 210 – 245 V
• Frequency: 50 Hz or 60 Hz
• ECO mode on/off
VE. Direct communication port: The VE. Direct port can be connected to a computer (VE. Direct to USB interface cable needed) to configure and monitor the same parameters.
Proven reliability: The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short-circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power: Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode: When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once on standby, the inverter will switch on for a short period every few seconds (adjustable). If the load exceeds the preset level, the inverter will remain on.
Remote on/off: A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (left) of the two pole connectors can be switched to battery plus, or the L terminal (right) of the two pole connectors can be switched to battery minus (or the chassis of a vehicle, for example).

Also Available in:

Click Here To View Victron Phoenix Inverter 12/2000 230V Smart DATASHEET

Click Here To View Victron Phoenix Inverter 12/2000 230V Smart MANUAL

Yep, we know... there are lots of options when buying products online.

We also believe in providing you with only the highest quality products, combined with exceptional customer service.

How You Win:

  • Free shipping Australia wide on most orders
  • Most competitive prices available
  • Pre and after sales Technical Support
  • 30 Day Easy Returns Policy 

We offer Free Shipping on most products, however some custom orders and heavy/bulky items may require specialised freight to some destinations, as noted on the affected products.

We want to be upfront. Nobody like nasty surprises and we strive to give you the best value. In these instances, we will contact you before processing the order to determine the fastest and most cost effective way of getting your items delivered.

Important Disclaimer: Installation of Hardwired Electrical Products in Australia

Please read the following information, including the disclaimer at the bottom of this page;
by purchasing from Buzz Energy Systems, you understand and acknowledge these terms. 

When it comes to the installation of hardwired electrical products in Australia, it is important to be aware of the regulations and guidelines in place to ensure safety and compliance.
As per the Electrical Safety Act, installations operating at ELV (Extra Low Voltage) levels of 60 volts and below can be installed by individuals with the necessary knowledge and skills.

However, it is crucial to note that installations operating above ELV levels require the expertise of licensed electricians and experienced installers. Products falling under this category are not suitable for DIY (Do-It-Yourself) installation and must be handled by professionals. Attempting to install such products without the proper qualifications can not only compromise performance but also invalidate any manufacturer's warranties. 

At Buzz Energy Systems, we recognise the importance of reliable and efficient installations that prioritise safety, performance and warranty compliance. Our team consists of qualified tradespeople and specialists who are equipped with the expertise required to handle complex electrical installations.

For installations that operate above ELV levels, we strongly advise against DIY installation. Instead, we recommend seeking professional assistance from licensed electricians and experienced installers to ensure the proper installation and optimal performance of such products.

When it comes to installing hardwired electrical products above ELV levels, rest assured that Buzz Energy Systems can provide the necessary qualified tradespeople and specialists. Our professional installation services guarantee compliance with regulations, the preservation of manufacturers warranties and most importantly, your safety.

Do not compromise on the installation of your hardwired electrical products. Trust Buzz Energy Systems for a professional and hassle-free experience.
Contact us today for advice or to schedule your installation with our qualified team.

Legal Indemnity Disclaimer

By engaging with Buzz Energy Systems, purchasing and utilising our products and services, you acknowledge and agree to the following indemnity disclaimer. This disclaimer covers any potential claims for death, injury, property damage, financial loss, or warranty claims:

  1. Assumption of Responsibility: Buzz Energy Systems shall not be responsible or liable for any consequences arising from the installation, operation or use of our products or services, excluding any rights or remedies you may have under the Australian Consumer Law or other applicable legislation. You, as the user or purchaser, assume full responsibility for any potential risks, damages, or losses that may occur, including those not covered under Australian Consumer Law.

  2. Proper Installation and Use: It is your responsibility to ensure that the installation, operation, and use of our products align with relevant laws, regulations, and safety guidelines. We strongly recommend seeking the expertise of licensed professionals to handle installations above ELV levels and to ensure compliance with all applicable codes and standards.

  3. Personal Injury and Property Damage: Buzz Energy Systems shall not be held liable for any injuries, damages, or losses caused by improper installation, operation, or maintenance of our products. You agree to indemnify and hold Buzz Energy Systems harmless from any liability in relation to personal injury or property damage resulting from the use of our products or services.

  4. Financial Loss: Buzz Energy Systems shall not be liable for any financial loss, including but not limited to direct or indirect loss of profits, revenue, or savings, arising from the use or inability to use our products or services. Any costs associated with repairs, replacements, or damages incurred fall under your responsibility.

  5. Warranty Claims: Buzz Energy Systems provides manufacturer warranties on our products, subject to the terms and conditions outlined in the accompanying documentation. However, we shall not be held liable for any warranty claims resulting from improper installation, operation or maintenance of our products. Warranties may become void if our products are not installed or used in accordance with supplied instructions or if unauthorised modifications or repairs are made.

  6. Independent Advice: It is recommended that you seek independent advice, particularly legal or professional guidance, to assess the suitability of our products and services for your specific requirements.

By engaging with Buzz Energy Systems, you acknowledge and voluntarily assume all risks associated with the installation, operation, and use of our products and services. This disclaimer extends to any third parties who may be affected by the use of our products or services.

Please note: This indemnity disclaimer is intended to be a general statement of our position and should not be interpreted as a comprehensive legal contract. We recommend seeking legal advice to draft and review any specific agreements or contracts related to the use of Buzz Energy Systems' products and services.