Deye SUN-50K-SG01HP3-AU-BM4 3 Phase Hybrid Inverter- Aus Stock, CEC
- Description
- Specifications
- Manual
- Warranty
- Why Buy from Buzz?
- Shipping
- Disclaimer
The 50kW Deye SUN-50K-SG01HP3-AU-BM4
Three Phase, High Voltage Hybrid Inverter is suitable for On and Off Grid residential and light commercial use, maximising the self-consumption rate of solar energy and increasing your energy independence.
The SUN-50K-SG01HP3-AU-BM4 Three Phase Hybrid inverter is part of a brand new series of three phase hybrid inverters supporting a 160-800 HV battery, ensuring system efficiency and less heat dissipation. Featuring an unbalanced three phase output and the ability to manage 2 independent battery banks, vastly extending the application scenarios.
With it's compact design and high-power density, this inverter also supports a 1.3 DC/AC ratio, saving device investment.
During the day, the PV system generates electricity which will be provided initially to the loads. Then, the excess energy will charge the battery. Finally, the stored energy can be released when the loads require it.
The inbuilt Automatic Transfer Switch will keep your appliances running without disruption, whilst the battery can also be charged by a connected generator to ensure uninterrupted supply in the event of a grid blackout.
DEYE Hybrid Inverters are fully compliant with the stringent standards set by the Australian Clean Energy Council (CEC).
This compliance not only assures you of the product’s safety and efficiency but also makes it eligible for various government incentives. Their suitability to Australian conditions, coupled with the assurance of meeting national standards, makes DEYE Hybrid Inverters a smart, cost effective choice for your energy needs.DEYE Sun hybrid inverters are designed with a versatile second AC input that allows for innovative energy management solutions.
The 'Micro Inv Input' feature which enables the Generator input port to be used as an additional input for AC coupled PV with micro-inverters; this feature is also compatible with "Grid-Tied" inverters.
The operation of this feature is linked to the battery's State of Charge (SOC). When the battery SOC is lower than a set value, the microinverter or grid-tied inverter will start to work. Conversely, when the battery SOC exceeds the set value, these inverters will shut down. The design allows for a flexible and efficient way to add a second PV array, especially in locations distant from the primary DEYE inverter setup. This enhances the overall energy management by AC coupling the second array to shorten the DC cabling.
Features
- 450-850v HV Battery range configuration
- Versatile 50kW unbalanced Three Phase 230v AC 50Hz Pure Sine Wave Inverter
- 10 Year Australian Warranty (5+5)
- Colorful touch LCD
- Quad MPPT 75000w total 180-1000v PV Input
- Max. battery charging/discharging current of 100A (50+50A)
- Dual Battery connection terminals supporting 2 independent battery banks
- 200A AC Pass through current
- 10 ms AC transfer no-break switching time
- IP65 protection rating
- AC couple capability to retrofit existing solar system
- Configurable generator (2nd AC) input
- Max. 10 pcs parallel for on-grid and off-grid operation
- 6 time periods for battery charging/discharging
- Equipped with RS485/CAN port for battery communication.
Yep, we know... there are lots of options when buying products online.
We also believe in providing you with only the highest quality products, combined with exceptional customer service.
How You Win:
- Free shipping Australia wide on most orders
- Most competitive prices available
- Pre and after sales Technical Support
- 30 Day Easy Returns Policy
We offer Free Shipping on most products, however some custom orders and heavy/bulky items may require specialised freight to some destinations, as noted on the affected products.
We want to be upfront. Nobody like nasty surprises and we strive to give you the best value. In these instances, we will contact you before processing the order to determine the fastest and most cost effective way of getting your items delivered.
Important Disclaimer: Installation of Hardwired Electrical Products in Australia
Please read the following information, including the disclaimer at the bottom of this page;
by purchasing from Buzz Energy Systems, you understand and acknowledge these terms.
When it comes to the installation of hardwired electrical products in Australia, it is important to be aware of the regulations and guidelines in place to ensure safety and compliance.
As per the Electrical Safety Act, installations operating at ELV (Extra Low Voltage) levels of 60 volts and below can be installed by individuals with the necessary knowledge and skills.
However, it is crucial to note that installations operating above ELV levels require the expertise of licensed electricians and experienced installers. Products falling under this category are not suitable for DIY (Do-It-Yourself) installation and must be handled by professionals. Attempting to install such products without the proper qualifications can not only compromise performance but also invalidate any manufacturer's warranties.
At Buzz Energy Systems, we recognise the importance of reliable and efficient installations that prioritise safety, performance and warranty compliance. Our team consists of qualified tradespeople and specialists who are equipped with the expertise required to handle complex electrical installations.
For installations that operate above ELV levels, we strongly advise against DIY installation. Instead, we recommend seeking professional assistance from licensed electricians and experienced installers to ensure the proper installation and optimal performance of such products.
When it comes to installing hardwired electrical products above ELV levels, rest assured that Buzz Energy Systems can provide the necessary qualified tradespeople and specialists. Our professional installation services guarantee compliance with regulations, the preservation of manufacturers warranties and most importantly, your safety.
Do not compromise on the installation of your hardwired electrical products. Trust Buzz Energy Systems for a professional and hassle-free experience.
Contact us today for advice or to schedule your installation with our qualified team.
Legal Indemnity Disclaimer
By engaging with Buzz Energy Systems, purchasing and utilising our products and services, you acknowledge and agree to the following indemnity disclaimer. This disclaimer covers any potential claims for death, injury, property damage, financial loss, or warranty claims:
Assumption of Responsibility: Buzz Energy Systems shall not be responsible or liable for any consequences arising from the installation, operation or use of our products or services, excluding any rights or remedies you may have under the Australian Consumer Law or other applicable legislation. You, as the user or purchaser, assume full responsibility for any potential risks, damages, or losses that may occur, including those not covered under Australian Consumer Law.
Proper Installation and Use: It is your responsibility to ensure that the installation, operation, and use of our products align with relevant laws, regulations, and safety guidelines. We strongly recommend seeking the expertise of licensed professionals to handle installations above ELV levels and to ensure compliance with all applicable codes and standards.
Personal Injury and Property Damage: Buzz Energy Systems shall not be held liable for any injuries, damages, or losses caused by improper installation, operation, or maintenance of our products. You agree to indemnify and hold Buzz Energy Systems harmless from any liability in relation to personal injury or property damage resulting from the use of our products or services.
Financial Loss: Buzz Energy Systems shall not be liable for any financial loss, including but not limited to direct or indirect loss of profits, revenue, or savings, arising from the use or inability to use our products or services. Any costs associated with repairs, replacements, or damages incurred fall under your responsibility.
Warranty Claims: Buzz Energy Systems provides manufacturer warranties on our products, subject to the terms and conditions outlined in the accompanying documentation. However, we shall not be held liable for any warranty claims resulting from improper installation, operation or maintenance of our products. Warranties may become void if our products are not installed or used in accordance with supplied instructions or if unauthorised modifications or repairs are made.
Independent Advice: It is recommended that you seek independent advice, particularly legal or professional guidance, to assess the suitability of our products and services for your specific requirements.
By engaging with Buzz Energy Systems, you acknowledge and voluntarily assume all risks associated with the installation, operation, and use of our products and services. This disclaimer extends to any third parties who may be affected by the use of our products or services.
Please note: This indemnity disclaimer is intended to be a general statement of our position and should not be interpreted as a comprehensive legal contract. We recommend seeking legal advice to draft and review any specific agreements or contracts related to the use of Buzz Energy Systems' products and services.